Cadeauzoeker
Buying for a modeler? Tell us their hobby and your budget and we'll suggest gifts that make sense.
Loading…
Not sure where to start?
A short guide for beginners, a gift finder, and a rescue desk for when a build keeps going wrong.
Not sure where to start?
Five quick questions. You get a short list of tools that fit what you build, how you paint and what you already own. Nothing is added to your cart until you say so.
Pick their hobby and a budget. Every pick here works on its own: no airbrush without its air supply, no spare parts for tools they may not own.
Hobbyist Haven13pcs Hobby Messen Set
€17,95
Hobbyist Haven502 Superlijm voor Schaalmodellen
from €12,95
Hobbyist HavenSiliconen vingerbeschermer
from €14,95
Hobbyist Haven12-Wells Rechthoekige Aluminium Verf Palet
from €12,95
Hobbyist Haven5 stuks Ultra-Fijne Liner Penselen voor Detailverf
from €29,95
Hobbyist HavenMo Shi Tools Nat Palet voor Modelverf
from €11,95
Hobbyist Haven5 Stuks siliconen penselen
€17,95
Hobbyist HavenFijne Detailpenselen voor Miniatuur- en Modelverf
from €10,95
DSPIAEDSPIAE Uittrekbare Stofborstel
€18,95
100Shiki100Shiki Droogkwasten voor Model Weerstand
from €14,95
Hobbyist HavenNIEUWE Premium Lensreiniger
€4,95
Hobbyist HavenAfneembare Alligator Clip Verf Sticks
from €10,95- Can't decide?
Hobbyist Haven Cadeaubon
from €9,00
Hobbyist HavenUltra Dunne Mes Zijknippers
€37,95
Hobbyist Haven9 stuks RVS Antistatische Precisie Pincet Set
€36,95
UStarUStar Precisie Pin Vise Boorset
€46,95
Hobbyist HavenVerstelbare 5 Lens LED Licht Hoofdband Vergrootglazen
€38,95
Hobbyist HavenHoudplank met 63 gaten voor pennen, kwasten of bouwgereedschap
€31,95
Hobbyist HavenHoudplank Met 30 Gaten Voor Pennen, Kwasten Of Bouwgereedschap
€31,95
Hobbyist HavenSprue Houder Voor Schaalmodellering
€31,95
Hobbyist HavenMulti-lens Vergrootglazen (1.0x - 14.0x vergroting)
€50,95
Hobbyist HavenEssentiële Gereedschappen Set Voor Schaalmodellering (Bouwgereedschap)
from €57,95
Hobbyist HavenDraaiende Verf Draaitafel voor Gundam en Militaire Modellering
€35,95
UStarPrecisie Mini Bankschroef Voor Schaalmodellering
€36,95
Hobbyist HavenMultifunctionele Sprues & Gereedschapshouders
from €31,95- Can't decide?
Hobbyist Haven Cadeaubon
from €9,00
DSPIAEDSPIAE Professionele Enkelbladige Knipper Set
€70,95
MadworksMadworks Enkele Blade Knipper
€62,95
DSPIAEDSPIAE Enkele Blad Zij-snijder
€64,95
Mo Shi ToolsUniversele Precisie Bankvise Voor Stuk Schilderen en Schuren
€71,95
UStarPrecisie Hand Stabilizer Voor Hobbyisten
€78,95
Hobbyist HavenSchuin Verf Fles Opslagrek
from €61,95
StediStedi Gundam & Modelbouw Gereedschapsset
€62,95
MadworksMadworks NERON Geavanceerde Detail Penseelset
€64,95
StediStedi MS-206 Handheld Split Bench Vise
from €70,95
MadworksMetalen Houder Voor Tang
€85,95
CormakeCormake Universele Modelbouw Klemset
€68,95
Hobbyist HavenVerf Fles Opslag / Organizer Koffer
from €71,95- Can't decide?
Hobbyist Haven Cadeaubon
from €9,00
DSPIAEDSPIAE 9-in-1 Multi-Functionele Hulpplatform
€130,95
DSPIAEDSPIAE Lange Foto-ets Buiger
€139,95
Hobbyist HavenHouten Draagbare Hobby Station
€206,95
Hobbyist HavenGeavanceerde Draadloze Verf Schudder
€123,95
Hobbyist HavenMG/RG 1/100 Gundam Mechanisch Basis Set met Decals
€120,95
Hobbyist HavenDraaiende Houder Voor 1/18 1/12 Motor Modellen
€132,95- Can't decide?
Hobbyist Haven Cadeaubon
from €9,00
Nothing in this band for that hobby. Try another budget or the gift card.
White marks where parts were cut
Usually: Usually a one-bite flush cut. Cut twice: first a few mm out, then close with a thin or single-blade nipper; shave and sand #400 → #1500.
Read the fix, step by step
Seams that keep coming back
Usually: Filler shrinks if you sand it before it cures. Fill, wait the full cure, sand, then prime to check. Tinted CA shows exactly what is left.
Read the fix, step by step
Decals silvering
Usually: Air trapped under the film on matt paint. Gloss coat first; press the water out from the centre. A softening brush helps on curves.
Read the fix, step by step
Paint lifting with the tape
Usually: Grease or mould release under the paint, or tape too sticky. Wash parts before priming; use low-tack tape and pull it back on itself.
Read the fix, step by step
Paint bleeding under masking
Usually: Edges not burnished, or tape too stiff for the curve. Thin flexible tape on curves; burnish the edge with a toothpick.
Read the fix, step by step
2~10mm Flexibele Maskeringstapefrom €17,95
Fijne lijn masking tape voor schaalmodellenfrom €15,95
Fogged clear parts
Usually: CA vapour. Glue clear parts with UV glue in small amounts, and let the joint air.
DSPIAE UV Lijmfrom €31,95
Vloeibare/Gel Snelle Uithardende UV Lijmfrom €12,95
Airbrush spitting
Usually: Paint too thick, a dirty or bent needle tip, or pressure too low for the mix. Thin a little, clean the tip, raise pressure in small steps.
Read the fix, step by step
Professionele Airbrush Reinigingsset€25,95
Airbrush Reinigingsflesfrom €15,95
Dust in the varnish
Usually: Spraying in a dusty room or touching too soon. Spray booth, clean air, a tack-free wait before handling.
Wash staining the paint
Usually: Wash on matt or unsealed paint. Seal with satin or gloss first; remove excess with a barely damp brush.
Read the fix, step by step
Grass that looks like carpet
Usually: One colour, one length, lying flat. Mix two lengths and colours; a static applicator stands them up.
Read the fix, step by step
Mould lines on miniatures
Usually: Scrape along the line with a scraper at a low angle, then smooth; check under raking light before priming.
Read the fix, step by step
Sticky resin print
Usually: Under-washed or under-cured. Gloves on, re-wash, cure as the resin maker says; never sand tacky resin.