Pin Vise vs Electric Hand Drill for Scale Models
Pin vise, hand drill or electric? Compare drills for scale models by speed and control, and learn to drill clean holes without cracking plastic.
Mike Lowrie |
-
-
Masking Tape vs Putty vs Sheets for Scale Models
Tape, putty, wrap film or sheets? Learn which masking material suits straight edges, camouflage, delicate parts and large areas on scale models.
Mike Lowrie |
-
Best Scale Model Tool Sets for Beginners (What to Buy)
Compare the five scale model tool sets we carry: nipper type, knife, sanding, tweezers and mat. Which one to buy first, and what to skip.
Mike Lowrie |
-
How to Use a Wet Palette for Miniature Painting (Without Over-Thinning Paint)
Learn how to set up and use a wet palette for miniature painting, keep acrylics workable longer, avoid watery paint, mix smoother blends and prevent common palette mistakes.
Mike Lowrie |
-
How to Scribe Panel Lines on Scale Models Without Slipping or Chipping
A practical guide to scribing and re-scribing panel lines on scale models and Gunpla: choosing a scriber, using guide tape and templates, working on curves and repairing slips.
Mike Lowrie |
-
How to Mask Scale Models Without Paint Bleed or Lifting
A practical masking guide for scale models: tape, liquid mask, putty, pre-cut masks, preventing paint bleed and avoiding lifted paint.
Mike Lowrie |
-
Why Is My Airbrush Splattering? A Scale Model Troubleshooting Guide
A diagnostic guide to airbrush splatter, spitting and pulsing: tip dry, clogs, PSI, thinning, moisture, needle damage and trigger technique.
Mike Lowrie |
-
How to Thin Paint for Airbrushing Scale Models
A practical guide to thinning model paint for airbrushing: starting ratios, PSI, nozzle size, spray-pattern diagnosis and common mistakes.
Mike Lowrie |
-
How to Fix Gaps and Seams in Plastic Models
A practical guide to diagnosing and fixing scale-model seams and gaps with cement, CA, modeling putty, epoxy putty, styrene shims and controlled sanding.
Mike Lowrie |
-
How to Apply Decals to Scale Models Without Silvering
A step-by-step waterslide decal guide covering surface prep, trimming, soaking, positioning, trapped air, decal solutions, silvering repair and storage.
Mike Lowrie |
-
Scale Model Paint Types Explained: Acrylic vs Enamel vs Lacquer
A practical comparison of acrylic, enamel and lacquer model paints: drying, leveling, solvents, durability, layering, thinning and safety.
Mike Lowrie |
-
How to Paint Scale Models by Hand: Brush Painting Guide for Beginners
A practical beginner guide to brush painting scale models: brush choice, thinning by behavior, thin coats, brush-mark control, detail work and cleanup.
Mike Lowrie |
-
How to Clean an Airbrush Properly: Between Colors, After a Session & Deep Cleaning
A deep, practical airbrush cleaning guide for scale modelers, with quick-flush, end-of-session and deep-clean workflows, troubleshooting, common mistakes and recommended cleaning tools.
Mike Lowrie |
