Stedi Tools for Gunpla: Nippers, Liners and More
A step-by-step look at Stedi nippers, tweezers, panel liners, joint pen and starter sets for Gunpla: what each does and what to buy first.
Mike Lowrie |
Stedi Tools for Gunpla: Nippers, Liners and More
-
Masking Tape vs Putty vs Sheets for Scale Models
Tape, putty, wrap film or sheets? Learn which masking material suits straight edges, camouflage, delicate parts and large areas on scale models.
Mike Lowrie |
-
Best Scale Model Tool Sets for Beginners (What to Buy)
Compare the five scale model tool sets we carry: nipper type, knife, sanding, tweezers and mat. Which one to buy first, and what to skip.
Mike Lowrie |
-
Weathering for Beginners: Washes, Pigments, Drybrushing and Stencils
A beginner's weathering guide for scale model tanks, aircraft and mecha: the right order, the tools, and the mistakes to avoid.
Mike Lowrie |
-
How to Remove Mold Lines from Miniatures Without Losing Detail
Mold lines ruin a paint job before you start. Learn the right tools and technique to remove mold lines from plastic, resin and metal miniatures without gouging detail.
Mike Lowrie |
-
Best Nippers for Gunpla and Scale Models: Single-Blade vs Double-Blade
Which nippers should you buy for Gunpla and scale models? Single-blade vs double-blade sprue cutters explained, plus the two-cut method.
Mike Lowrie |
-
How to Use a Wet Palette for Miniature Painting (Without Over-Thinning Paint)
Learn how to set up and use a wet palette for miniature painting, keep acrylics workable longer, avoid watery paint, mix smoother blends and prevent common palette mistakes.
Mike Lowrie |
-
How to Scribe Panel Lines on Scale Models Without Slipping or Chipping
A practical guide to scribing and re-scribing panel lines on scale models and Gunpla: choosing a scriber, using guide tape and templates, working on curves and repairing slips.
Mike Lowrie |
-
How to Mask Scale Models Without Paint Bleed or Lifting
A practical masking guide for scale models: tape, liquid mask, putty, pre-cut masks, preventing paint bleed and avoiding lifted paint.
Mike Lowrie |
-
Why Is My Airbrush Splattering? A Scale Model Troubleshooting Guide
A diagnostic guide to airbrush splatter, spitting and pulsing: tip dry, clogs, PSI, thinning, moisture, needle damage and trigger technique.
Mike Lowrie |
-
How to Thin Paint for Airbrushing Scale Models
A practical guide to thinning model paint for airbrushing: starting ratios, PSI, nozzle size, spray-pattern diagnosis and common mistakes.
Mike Lowrie |
-
How to Fix Gaps and Seams in Plastic Models
A practical guide to diagnosing and fixing scale-model seams and gaps with cement, CA, modeling putty, epoxy putty, styrene shims and controlled sanding.
Mike Lowrie |
-
How to Apply Decals to Scale Models Without Silvering
A step-by-step waterslide decal guide covering surface prep, trimming, soaking, positioning, trapped air, decal solutions, silvering repair and storage.
Mike Lowrie |
