Hilf mir bei der Auswahl
Answer a few quick questions and get a short list of tools that fit what you build.
Loading…
Not sure where to start?
A short guide for beginners, a gift finder, and a rescue desk for when a build keeps going wrong.
Not sure where to start?
Five quick questions. You get a short list of tools that fit what you build, how you paint and what you already own. Nothing is added to your cart until you say so.
Pick their hobby and a budget. Every pick here works on its own: no airbrush without its air supply, no spare parts for tools they may not own.
Hobbyist Haven13 Stück Hobby-Messer-Set
€17,95
Hobbyist Haven502 Superkleber für Modellbau
from €12,95
Hobbyist HavenSilikonfinger-Schoner
from €14,95
Hobbyist Haven12-Well Rechteckige Aluminium Farbpalette
from €12,95
Hobbyist Haven5 Stück ultrafeine Liner-Pinsel für Detailmalerei
from €29,95
Hobbyist HavenMo Shi Tools Nasspalette für Modellmalerei
from €11,95
Hobbyist Haven5 Stück Silikonpinsel
€17,95
Hobbyist HavenFeine Detailpinsel für Miniatur- und Modellmalerei
from €10,95
DSPIAEDSPIAE ausziehbarer Staubpinsel
€18,95
100Shiki100Shiki Trockenbürsten für Modellwetterung
from €14,95
Hobbyist HavenNEU Premium Linsenreiniger
€4,95
Hobbyist HavenAbnehmbare Alligatorclip-Malstäbe
from €10,95- Can't decide?
Hobbyist Haven Geschenkkarte
from €9,00
Hobbyist HavenUltradünne Klingen-Seitenschneider
€37,95
Hobbyist Haven9 Stück Edelstahl antistatische Präzisionspinzette Set
€36,95
UStarUStar Präzisionsbohrer Set
€47,95
Hobbyist HavenVerstellbare LED-Lichtkopfbedeckung mit 5 Linsen
€38,95
Hobbyist HavenHalterregal mit 63 Löchern für Stifte, Pinsel oder Bauwerkzeuge
€31,95
Hobbyist HavenHalteablage mit 30 Löchern für Stifte, Pinsel oder Werkzeug
€31,95
Hobbyist HavenGießrahmenhalter für den Modellbau
€31,95
Hobbyist HavenMehrlinsen-Vergrößerungsgläser (1,0x - 14,0x Vergrößerung)
€50,95
Hobbyist HavenWesentliche Werkzeugsatz für den Modellbau (Bauwerkzeuge)
from €57,95
Hobbyist HavenDrehbare Malplatte für Gundam und Militärmodellierung
€35,95
UStarPräzisions-Mini-Schraubstock für den Modellbau
€36,95
Hobbyist HavenMultifunktionale Halter für Spritzguss und Werkzeuge
from €31,95- Can't decide?
Hobbyist Haven Geschenkkarte
from €9,00
DSPIAEDSPIAE professionelles Ein-Klingen-Nipper-Set
€70,95
MadworksMadworks Ein-Klingen Zange
€62,95
DSPIAEDSPIAE Ein-Klingen-Seitenschneider
€64,95
Mo Shi ToolsUniverselle Präzisionsbankzange für Teilemalerei und -schleifen
€71,95
UStarPräzisionshandstabilisator für Hobbyisten
€78,95
Hobbyist HavenSchräger Farbdosenlagerregal
from €61,95
StediStedi Gundam- und Modellbau-Werkzeugset
€62,95
MadworksMadworks NERON Advanced Detail Pinselset
€64,95
StediStedi MS-206 Handheld Split Bench Vise
from €70,95
MadworksMetallhalter für Zangen
€86,95
CormakeCormake Universal Modellbauzangen-Set
€68,95
Hobbyist HavenFarbenflaschen Aufbewahrung / Organizer Koffer
from €71,95- Can't decide?
Hobbyist Haven Geschenkkarte
from €9,00
DSPIAEDSPIAE 9-in-1 Multifunktions-Hilfsplattform
€130,95
DSPIAEDSPIAE langer Fotoätzteile-Bieger
€140,95
Hobbyist HavenHolz Tragbare Hobbystation
€207,95
Hobbyist HavenFortgeschrittener kabelloser Farbmischer
€123,95
Hobbyist HavenMG/RG 1/100 Gundam Mechanik Basis Set mit Decals
€121,95
Hobbyist HavenDrehhalter für 1/18 1/12 Motorradmodelle
€133,95- Can't decide?
Hobbyist Haven Geschenkkarte
from €9,00
Nothing in this band for that hobby. Try another budget or the gift card.
White marks where parts were cut
Usually: Usually a one-bite flush cut. Cut twice: first a few mm out, then close with a thin or single-blade nipper; shave and sand #400 → #1500.
Read the fix, step by stepSeams that keep coming back
Usually: Filler shrinks if you sand it before it cures. Fill, wait the full cure, sand, then prime to check. Tinted CA shows exactly what is left.
Read the fix, step by stepDecals silvering
Usually: Air trapped under the film on matt paint. Gloss coat first; press the water out from the centre. A softening brush helps on curves.
Read the fix, step by stepPaint lifting with the tape
Usually: Grease or mould release under the paint, or tape too sticky. Wash parts before priming; use low-tack tape and pull it back on itself.
Read the fix, step by stepPaint bleeding under masking
Usually: Edges not burnished, or tape too stiff for the curve. Thin flexible tape on curves; burnish the edge with a toothpick.
Read the fix, step by step
2~10 mm flexibles Abdeckbandfrom €17,95
Feines Abdeckband für den Modellbaufrom €15,95
Fogged clear parts
Usually: CA vapour. Glue clear parts with UV glue in small amounts, and let the joint air.
DSPIAE UV-Kleberfrom €31,95
Flüssig/Gel schnell härtender UV-Kleberfrom €12,95
Airbrush spitting
Usually: Paint too thick, a dirty or bent needle tip, or pressure too low for the mix. Thin a little, clean the tip, raise pressure in small steps.
Read the fix, step by step
Professionelles Airbrush-Reinigungsset€25,95
Airbrush-Reinigungsflaschefrom €15,95
Dust in the varnish
Usually: Spraying in a dusty room or touching too soon. Spray booth, clean air, a tack-free wait before handling.
Wash staining the paint
Usually: Wash on matt or unsealed paint. Seal with satin or gloss first; remove excess with a barely damp brush.
Read the fix, step by stepGrass that looks like carpet
Usually: One colour, one length, lying flat. Mix two lengths and colours; a static applicator stands them up.
Read the fix, step by stepMould lines on miniatures
Usually: Scrape along the line with a scraper at a low angle, then smooth; check under raking light before priming.
Read the fix, step by stepSticky resin print
Usually: Under-washed or under-cured. Gloves on, re-wash, cure as the resin maker says; never sand tacky resin.





































































