{"title":"Tools for PE \u0026 Metal Parts","description":"\u003cp\u003eBending jigs, benders and specialist tools for working with photo-etch and metal parts. Fold, shape and fit fine brass detail cleanly and accurately.\u003c\/p\u003e","products":[{"product_id":"photo-etched-parts-bender-square","title":"Photo Etched parts Bender (Square)","description":"\u003cp\u003eFold photo-etched parts cleanly and at the right angle with this square PE bender. Photo-etch frets come flat, but most detail parts — railings, brackets, boxes — need crisp three-dimensional folds. This tool holds the fret firmly and gives you a straight edge to bend against, so parts come out sharp instead of creased or damaged.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eMultiple surfaces and slots let you make short and long bends at consistent angles, protecting thin, delicate brass and steel parts from over-bending or distortion. Well suited to aircraft, armor, and ship detailing.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eMaterials: silicone, resin, plastic. Size: 59 x 59 mm (2.32 x 2.32 in).\u003c\/p\u003e","brand":"Master Tools","offers":[{"title":"Default Title","offer_id":27999637635174,"sku":"HH-PHOTOETCHE-00416-01","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/photo-etched-parts-bender-square-hobbyisthaven-379.webp?v=1772806903"},{"product_id":"heat-insulation-soldering-silicone-desk-mat-with-magnetic-section","title":"Heat Insulation Soldering  Silicone Desk Mat With Magnetic Section","description":"\u003cp\u003eIf you're working in a complex electronic device or board, you usually have all kinds of components you have to work with, the lead wire, screws, screwdrivers, and of course, your soldering iron.\u003c\/p\u003e\n\u003cp\u003eAnd there are definitely two things you don't want happening:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLosing a component (like a tiny resistor or capacitor, or a tiny screw) on your workbench, or knocking it down to the floor and never see it again.\u003c\/li\u003e\n\u003cli\u003eHaving the heat from your soldering iron damaging your table, especially if it's not a workstation and you're doing this at home.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is where this silicone desk comes in.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe special material it was designed with acts as a powerful insulator, \u003cstrong\u003epreventing heat from damaging any surface below it\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThe mat includes several \"storage\" sections, where you can place your components so that \u003cstrong\u003eyour workspace is always organized\u003c\/strong\u003e and you have everything on hand.\u003c\/li\u003e\n\u003cli\u003eMoreover, it includes several sections that have been magnetized, so you can place your screws and other metallic parts there, and \u003cstrong\u003ebe sure they won't fall off\u003c\/strong\u003e and get lost.\u003c\/li\u003e\n\u003cli\u003eThe \"Large\" variant \u003cem\u003eincludes lids in several of the sections\u003c\/em\u003e so that you can be sure that \u003cstrong\u003ewhatever you place inside will be safe and protected\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIt is a flexible surface, which means you can \u003cstrong\u003econveniently fold it and store it and\/or carry it anywhere you want\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCharacteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize (Medium): 35 x 25 cm. (13.78 x 9.84 in.)\u003c\/li\u003e\n\u003cli\u003eSize (Large): 45 x 30 cm. (17.72 x 11.81 in.)\u003c\/li\u003e\n\u003cli\u003eThickness: Approx. 5 mm. (0.20 in.)\u003c\/li\u003e\n\u003cli\u003eHeat resistance: 500ºC (932 ºF)  \u003c\/li\u003e\n\u003cli\u003eMaterial: Environmentally friendly organosilicone\u003c\/li\u003e\n\u003cli\u003eSoldering iron, lead wire and components not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Hobbyist Haven","offers":[{"title":"Medium","offer_id":31174182436966,"sku":"HH-HEATINSULA-00577-01","price":30.95,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":31174182469734,"sku":"HH-HEATINSULA-00578-02","price":48.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/heat-insulation-soldering-silicone-desk-mat-with-magnetic-section-large-hobbyisthaven-541.webp?v=1772807292"},{"product_id":"soldering-iron-support-station","title":"Soldering Iron Support Station","description":"\u003cp\u003eIf you are soldering circuit boards, repairing smartphones or computers, this item is simply a must-have.\u003c\/p\u003e\n\u003cp\u003eA stable and lightweight soldering iron support station that allows you to keep your tool in a safe stand, so you don't burn yourself or your workbench while at the same time you can conveniently grab it when you need it.\u003c\/p\u003e\n\u003ch2\u003eCharacteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for most soldering iron models, with different lengths of handles.\u003c\/li\u003e\n\u003cli\u003eTin wire base size: 11.5 x 10 x 2 cm. (4.53 x 3.94 x 0.79 in.)\u003c\/li\u003e\n\u003cli\u003eIron stand diameter: 2-3.5 cm. (0.79-1.38 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Metal color can be Gold or Silver Color but functionality is the same.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hobbyist Haven","offers":[{"title":"Default Title","offer_id":31174318129254,"sku":"HH-SOLDERINGI-00579-01","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/soldering-iron-support-station-hobbyisthaven-534.webp?v=1772807314"},{"product_id":"6-pcs-precision-soldering-assist-hand-tools-set","title":"6 pcs Precision Soldering Assist Hand Tools Set","description":"\u003cp\u003eThis is a must-have tool set both for electronics enthusiasts and also professionals. They can be widely used in printed circuit board assembly and maintenance.\u003c\/p\u003e\n\n\u003cp\u003eTheir applications go for holding, removing, cleaning, etc. and for precision work.\u003c\/p\u003e\n\n\u003cp\u003eThe set includes:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1 x Knife-like point\u003c\/li\u003e\n\t\u003cli\u003e1 x Fork-like point \u003c\/li\u003e\n\t\u003cli\u003e1 x Reamer  \u003c\/li\u003e\n\t\u003cli\u003e1 x Chip Holder  \u003c\/li\u003e\n\t\u003cli\u003e1 x Abrasive Brush  \u003c\/li\u003e\n\t\u003cli\u003e1 x Needle Point\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Hobbyist Haven","offers":[{"title":"Orange","offer_id":39337039069286,"sku":"HH-6PCSPRECIS-00878-01","price":14.95,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":39337039102054,"sku":"HH-6PCSPRECIS-00879-02","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/6-pcs-precision-soldering-assist-hand-tools-set-hobbyisthaven-333.webp?v=1772808776"},{"product_id":"trumpeter-large-photo-etched-parts-bender","title":"Trumpeter Large Photo Etched Parts Bender","description":"\u003cp\u003eIf you want to work with photoetched parts in a consistent way, you definitely need a professional bender.\u003c\/p\u003e\n\n\u003cp\u003eDepending on the size of the pieces, you may do with a smaller one, but trust me, it's quite likely that at some point you will want to bend a 1\/35 tank fender, the railings on the side of a 1\/700 ship, or some big flaps in a 1\/48 or 1\/32 plane, and at that moment you will either be glad you have a large one... or regret not having it.\u003c\/p\u003e\n\n\u003cp\u003eThis one, made by Trumpeter, has a length of 162 mm. which will cover all your needs. \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Master Tools","offers":[{"title":"Default Title","offer_id":39363874979942,"sku":"HH-TRUMPETERL-01160-01","price":78.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/trumpeter-large-photo-etched-parts-bender-hobbyisthaven-243.webp?v=1772809404"},{"product_id":"700w-hot-air-soldering-station","title":"700W Hot Air Soldering Station","description":"\u003cp\u003eExcellent product if you enjoy electronics or super-detailed scale modeling. \u003c\/p\u003e\n\n\u003cp\u003eHot air guns are an alternative to soldering irons and have the advantage of heating up (and also cooling off) much faster, which is convenient because it saves you time, and prevents accidents. \u003c\/p\u003e\n\n\u003cp\u003eThis hot air gun has an output wattage of 750W and a temperature range between 100 and 480ºC. \u003c\/p\u003e\n\n\u003cp\u003eIt comes with three tips with different diameters, a stand, and the transformer\/control unit. Available in two different input voltages typical of EU and US power grids.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Hobbyist Haven","offers":[{"title":"EU Plug \/ Orange","offer_id":39486773395558,"sku":"HH-700WHOTAIR-01989-01","price":54.47,"currency_code":"USD","in_stock":true},{"title":"EU Plug \/ Black","offer_id":39486773526630,"sku":"HH-700WHOTAIR-01990-02","price":54.47,"currency_code":"USD","in_stock":true},{"title":"EU Plug \/ Yellow","offer_id":39486773657702,"sku":"HH-700WHOTAIR-01991-03","price":54.47,"currency_code":"USD","in_stock":true},{"title":"EU Plug \/ Light Grey","offer_id":39486773788774,"sku":"HH-700WHOTAIR-01992-04","price":54.47,"currency_code":"USD","in_stock":true},{"title":"US Plug \/ Orange","offer_id":39486773428326,"sku":"HH-700WHOTAIR-01993-05","price":54.47,"currency_code":"USD","in_stock":true},{"title":"US Plug \/ Black","offer_id":39486773559398,"sku":"HH-700WHOTAIR-01994-06","price":54.47,"currency_code":"USD","in_stock":true},{"title":"US Plug \/ Yellow","offer_id":39486773690470,"sku":"HH-700WHOTAIR-01995-07","price":54.47,"currency_code":"USD","in_stock":true},{"title":"US Plug \/ Light Grey","offer_id":39486773821542,"sku":"HH-700WHOTAIR-01996-08","price":54.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/700w-hot-air-soldering-station-hobbyisthaven-816.webp?v=1772811404"},{"product_id":"simple-photoetch-bending-and-handle-making-tool","title":"Simple Photoetch Bending And Handle Making Tool","description":"\u003cp\u003eIt's quite usual for modern kits to include some photo-etched parts OOB, and many of us love buying aftermarket parts from Eduard and the likes to super-detail our models. \u003c\/p\u003e\n\n\u003cp\u003eBut of course, working with PE means folding parts of the pieces, to make them three-dimensional. However, if you try to do it with your hands or even regular tweezers, you risk damaging them or not folding them at the correct angle(s).\u003c\/p\u003e\n\n\u003cp\u003eThere are high-grade PE bending tools available in our store, but if you are looking for a simple, inexpensive tool, this is perfect for you: \u003cstrong\u003eusing its different surfaces, you will get perfect results no matter how many folds your part needs, as well as ensure you don't damage these small, delicate parts\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eBesides, it can be used to make handles, etc out of wire, using the guiding holes it includes.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Hobbyist Haven","offers":[{"title":"Default Title","offer_id":39779351101542,"sku":"HH-SIMPLEPHOT-02691-01","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/simple-photoetch-bending-and-handle-making-tool-hobbyisthaven-574.webp?v=1772813499"},{"product_id":"ustar-59x59mm-photoetch-bending-tool","title":"UStar 59x59mm Photoetch Bending Tool","description":"\u003cp\u003eMost modern models include some photo-etched parts OOB, and of course, many of us buy aftermarket parts to super-detail our models.\u003c\/p\u003e\n\u003cp\u003eHowever, photo-etched sheets are flat, so you have to fold them to make three-dimensional assemblies.\u003c\/p\u003e\n\u003cp\u003eIf you try to do it with your hands or even regular tweezers, you risk damaging them or not folding them at the correct angle(s).\u003c\/p\u003e\n\u003cp\u003eThis is where this accessory comes in: with its different surfaces, you will get perfect results no matter how many folds your part needs, and you won't\u003cstrong\u003e damage these small, delicate parts\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eSpecifications\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eSize: 59 x 59 mm (2.32 x 2,32 in.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"UStar","offers":[{"title":"Default Title","offer_id":39951148482662,"sku":"HH-USTARPHOTO-02922-01","price":42.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/ustar-59x59mm-photoetch-bending-tool-hobbyisthaven-836.webp?v=1772814497"},{"product_id":"handle-making-tool","title":"Handle Making Tool","description":"\u003cp\u003eWe often strive for accuracy in our scale models. And some of the elements that are often out of scale are grab handles.\u003c\/p\u003e\n\n\u003cp\u003eThe solution is straightforward: re-create them with \u003ca href=\"https:\/\/hobbyisthaven.com\/collections\/wires-chains-threads\/products\/1m-0-2-5-mm-copper-wire?variant=39492051402854\"\u003ecopper wire\u003c\/a\u003e. But the wire is not easy to bend in the correct shape to achieve a realistic handle.\u003c\/p\u003e\n\n\u003cp\u003eThis tool will allow you to create perfectly shaped handles in no time. Valid for 3, 4, and 5mm long handles and wire diameters 0.3 and 0.4mm\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Master Tools","offers":[{"title":"Default Title","offer_id":46395980677409,"sku":"HH-HANDLEMAKI-03640-01","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/handle-making-tool-hobbyisthaven-782.webp?v=1772817729"},{"product_id":"stepped-mandrel","title":"Stepped Mandrel","description":"\u003cp\u003eSometimes our models require us to create wraps of certain diameters. We may have to create shock absorbers or rolled conduits in a hydraulic installation.\u003c\/p\u003e\n\u003cp\u003eWith this stepped mandrel, you will have areas of different diameters around which you can wrap a brass or copper wire, in order to achieve a perfect result.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47104003113249,"sku":"HH-STEPPEDMAN-03735-01","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/stepped-mandrel-hobbyisthaven-520.webp?v=1772818358"},{"product_id":"corrugated-sheet-shaping-jig-and-aluminum-sheets","title":"Corrugated Sheet Shaping Jig And Aluminum Sheets","description":"\u003cp\u003eCorrugated roofs are typical in military and industrial buildings, as well as in civilian buildings in some cultures.\u003c\/p\u003e\n\n\u003cp\u003eIf you want to add them to a diorama, you can buy \u003ca href=\"https:\/\/hobbyisthaven.com\/products\/8pcs-1-35-corrugated-metal-sheets\"\u003epre-made sheets\u003c\/a\u003e, or you can make them yourself with this jig and some \u003ca href=\"https:\/\/hobbyisthaven.com\/collections\/sheets-planks-plates\/products\/0-1-0-2mm-copper-sheet-roll\"\u003ecopper\u003c\/a\u003e or \u003ca href=\"https:\/\/hobbyisthaven.com\/collections\/sheets-planks-plates\/products\/100mm-x-100mm-aluminum-plate-available-0-3-10mm-thick\"\u003ealuminum\u003c\/a\u003e sheets.\u003c\/p\u003e\n\n\u003cp\u003eThis special includes the corrugated template, shaping sticks, and 5 complimentary aluminum sheets.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Hobbyist Haven","offers":[{"title":"Default Title","offer_id":47386851475745,"sku":"HH-CORRUGATED-03769-01","price":16.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/corrugated-sheet-shaping-jig-and-aluminum-sheets-hobbyisthaven-316.webp?v=1772818675"},{"product_id":"photoetch-parts-rolling-set","title":"Photoetch Parts Rolling Set","description":"\u003cp\u003eAftermarket photo-etch sets require you to roll certain parts into cylinders or curved surfaces.\u003c\/p\u003e\n\n\u003cp\u003eYou need a guiding surface to roll the PE around, and it's often hard to find an item of the correct diameter.\u003c\/p\u003e\n\n\u003cp\u003eThis set includes six cylindrical stainless steel rods of different sizes so you will always find a guide when bending your photoetch.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":47672942231841,"sku":"HH-PHOTOETCHP-03845-01","price":64.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/photoetch-parts-rolling-set-hobbyisthaven-442.webp?v=1772819178"},{"product_id":"photo-etch-bending-pliers","title":"Photo-etch Bending Pliers","description":"\u003cp\u003eMany modern kits include some photo-etched parts OOB and, of course, we often buy aftermarket parts from Eduard and the likes to super-detail our models.\u003c\/p\u003e\n\n\u003cp\u003eBut of course, photo-etched sheets are flat, and metal parts have to be bent so they represent the \"real thing,\" which is usually three-dimensional.\u003c\/p\u003e\n\n\u003cp\u003eYou can use photo-etch benders for big parts, but for some small parts where many folds have to be made in a small space, special tweezers or pliers are a better option.\u003c\/p\u003e\n\n\u003cp\u003eThese edgeless professional pliers by DSPIAE are created with durable materials, are designed to assist you in delicate jobs, and can last a lifetime.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":48035986866465,"sku":"HH-PHOTOETCH-03903-01","price":38.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/photo-etch-bending-pliers-hobbyisthaven-546.webp?v=1772819650"},{"product_id":"rod-bending-tool","title":"Rod Bending Tool","description":"\u003cp\u003eWe often have to create railings, handles, etc, for our models.\u003c\/p\u003e\n\n\u003cp\u003eA very good option is to create them with \u003ca href=\"https:\/\/hobbyisthaven.com\/collections\/wires-chains-threads\/products\/1m-0-2-5-mm-copper-wire?variant=39492051402854\"\u003ecopper wire\u003c\/a\u003e. However, the wire is not easily bent into the correct shape to achieve a realistic handle.\u003c\/p\u003e\n\n\u003cp\u003eThis tool will allow you to create perfectly shaped handles in no time.\u003c\/p\u003e\n\n\u003cp\u003eValid for 2 through 40mm handles.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Leungs Workshop","offers":[{"title":"Default Title","offer_id":48263938900257,"sku":"HH-RODBENDING-03942-01","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/rod-bending-tool-hobbyisthaven-861.webp?v=1772819942"},{"product_id":"tempered-glass-cutting-mat","title":"Tempered Glass Cutting Mat","description":"\u003cp\u003eA rigid tempered glass cutting mat designed for precise, clean cuts on delicate materials that a standard self-healing mat cannot handle.\u003c\/p\u003e\n\u003cp\u003eRegular soft cutting mats flex under pressure — perfect for styrene or wood, but a problem when working with photo-etch parts, masking tape, decal paper, or any thin material that needs a perfectly flat, hard surface. This glass mat eliminates flex completely, giving you a stable base that holds materials firmly and lets your blade cut cleanly every time.\u003c\/p\u003e\n\u003ch4\u003eIdeal for:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePhoto-etch parts — no bending or warping during cuts\u003c\/li\u003e\n\u003cli\u003eMasking tape — clean edges, no drag\u003c\/li\u003e\n\u003cli\u003eDecal paper — precise cuts without slipping\u003c\/li\u003e\n\u003cli\u003eFine detail work on scale models, Gunpla, and miniatures\u003c\/li\u003e\n\u003cli\u003eAny task requiring a completely flat, hard cutting surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 220 x 150 x 4 mm\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tempered glass\u003cbr\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e All standard hobby knives and scalpels\u003cbr\u003e\u003c\/p\u003e","brand":"Galaxy Model","offers":[{"title":"Default Title","offer_id":48472418058529,"sku":"HH-TEMPEREDGL-03982-01","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/tempered-glass-cutting-mat-hobbyisthaven-239.webp?v=1772820270"},{"product_id":"scissors-for-pe-parts","title":"Scissors For PE Parts","description":"\u003cp\u003ePE parts can be removed from the fret with a hobby knife, a \u003ca href=\"https:\/\/hobbyisthaven.com\/collections\/tools-for-pe-metal-parts\/products\/pe-cutting-tools\"\u003especialized blade\u003c\/a\u003e, or with these special precision scissors.\u003c\/p\u003e\n\n\u003cp\u003eThe main advantage scissors offer is that you don't need a cutting surface and that you can place the PE fret in the most convenient position for the cut, as opposed to having to place it flat on your bench.\u003c\/p\u003e\n\n\u003cp\u003eThese quality scissors created by UStar feature a specially designed shape for the best grip, and durable materials to ensure they remain sharp no matter how often you use them.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"UStar","offers":[{"title":"Default Title","offer_id":48665291325729,"sku":"HH-SCISSORSFO-03985-01","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/scissors-for-pe-parts-hobbyisthaven-606.webp?v=1772820286"},{"product_id":"3pcs-wax-pencils","title":"3pcs Wax Pencils","description":"\u003cp\u003eWhen working with tiny parts (PE details, 3D-printed rivets, minute styrene parts in a kit) our fingers are often too big to handle them. Even precision tweezers may not be ideal for flat pieces, etc.\u003c\/p\u003e\n\u003cp\u003eThe best way to handle these pieces and place them in their final position in the model for gluing is to use a wax pencil. They are sticky enough for the small parts to remain attached to the tip once you touch them, but not so sticky as to prevent the part from staying in place after gluing.\u003c\/p\u003e\n\u003cp\u003e3 pieces included. They can be sharpened with a regular pencil sharpener.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","brand":"Hobbyist Haven","offers":[{"title":"Default Title","offer_id":48857093177633,"sku":"HH-3PCSWAXPEN-04061-01","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/3pcs-wax-pencils-hobbyisthaven-339.webp?v=1772820776"},{"product_id":"wire-bender-tool","title":"Wire Bender Tool","description":"\u003cp\u003eCopper or brass wire can be used to create railings, handles, etc., for your models. However, the wire is not easily bent into the correct shape to achieve a realistic handle.\u003c\/p\u003e\n\n\u003cp\u003eThis tool will allow you to create perfectly shaped 1.5 through 13 mm handles in no time.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Calabaza Model","offers":[{"title":"Default Title","offer_id":48966760464673,"sku":"HH-WIREBENDER-04088-01","price":22.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/wire-bender-tool-hobbyisthaven-731.webp?v=1772820955"},{"product_id":"stainless-steel-scissors-for-etched-parts-and-decal-cutting","title":"Stainless Steel Scissors For Etched Parts And Decal Cutting","description":"\u003cp\u003eMade of hardened stainless steel, they will keep a sharp cutting edge for many years, ensuring professional results and effortless work.\u003c\/p\u003e\n\n\u003cp\u003eCompletely flat for better control of the cuts to prevent accidental damage to decals or small PE parts.\u003c\/p\u003e\n\n\u003cp\u003eAt 11g, they are extremely lightweight.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Mo Shi Tools","offers":[{"title":"Default Title","offer_id":49425648714017,"sku":"HH-STAINLESSS-04162-01","price":9.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/stainless-steel-scissors-for-etched-parts-and-decal-cutting-hobbyisthaven-116.webp?v=1772821418"},{"product_id":"hd-pliers-for-pe-and-metal-parts","title":"HD Pliers For PE And Metal Parts","description":"\u003cp\u003eMany kits nowadays come with PE parts to add details. There are thousands of aftermarket PE sets to improve base kits. And, of course, we can also scratch-build sections of a kit or diorama, or even build complete structures, with metal sheets or rods.\u003c\/p\u003e\n\n\u003cp\u003eAnd, often, these have to be bent so they represent the \"real thing,\" which is usually three-dimensional.\u003c\/p\u003e\n\n\u003cp\u003eYou can use thin PE bending tweezers for tiny parts but, for longer or sturdier parts, you need something bigger.\u003c\/p\u003e\n\n\u003cp\u003eThese two pliers (with a flat and a round profile) are created with durable materials, and are designed to achieve perfect bends.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"HD Model","offers":[{"title":"Round","offer_id":49427556303137,"sku":"HH-HDPLIERSFO-04163-01","price":18.95,"currency_code":"USD","in_stock":true},{"title":"Flat","offer_id":49427556335905,"sku":"HH-HDPLIERSFO-04164-02","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/hd-pliers-for-pe-and-metal-parts-hobbyisthaven-300.webp?v=1772821433"},{"product_id":"brass-copper-rod-cutter","title":"Brass\/Copper Rod Cutter","description":"\u003cp\u003eEasily cut any soft metal rods with this cutter.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n","brand":"Madworks","offers":[{"title":"Default Title","offer_id":50183008223521,"sku":"HH-BRASSCOPP-04481-01","price":48.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/brass-copper-rod-cutter-hobbyisthaven-296.webp?v=1772822544"},{"product_id":"dspiae-square-photo-etch-bending-tool","title":"DSPIAE Square Photo-Etch Bending Tool","description":"\u003cp\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eMany contemporary kits come with some photo-etched components right out of the box, and many of us purchase aftermarket parts to add extra detail to our models. \u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eHowever, since photo-etched sheets are flat, creating three-dimensional assemblies requires folding them into shape. \u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eAttempting to fold them by hand or with standard tweezers can damage them or cause incorrect angles.\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eThis accessory proves helpful in this situation: \u003cstrong\u003eits various surfaces guarantee optimal results regardless of the number of folds needed while also protecting these small and delicate components from harm\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eSpecifications\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eSize: 91 x 60 mm (3.58 x 2,36 in.)\u003c\/p\u003e\n","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":51221003895073,"sku":"HH-DSPIAESQUA-05280-01","price":66.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/dspiae-square-photo-etch-bending-tool-hobbyisthaven-302.webp?v=1772827564"},{"product_id":"dspiae-long-photo-etch-bender","title":"DSPIAE Long Photo-Etch Bender","description":"\u003cp\u003eIf you aim to work consistently with photoetched parts, investing in a professional bender is essential.\u003c\/p\u003e\n\n\u003cp\u003eDepending on the size of the components, a smaller, \u003ca href=\"https:\/\/hobbyisthaven.com\/collections\/tools-for-pe-metal-parts\/products\/dspiae-square-photo-etch-bending-tool\"\u003esquare bender\u003c\/a\u003e might suffice; however, I assure you that eventually, you'll want to bend a 1\/35 tank fender, the railings of a 1\/700 ship, or large flaps from a 1\/48 or 1\/32 aircraft.\u003c\/p\u003e\n\n\u003cp\u003eWhen that moment arrives, you’ll either appreciate having a larger option or regret not purchasing one.\u003c\/p\u003e\n\n\u003cp\u003eThis particular model, crafted by DSPIAE, measures 177 mm (6.96 in) in length, which is adequate for all your requirements.\u003c\/p\u003e\n","brand":"DSPIAE","offers":[{"title":"Default Title","offer_id":51221081489697,"sku":"HH-DSPIAELONG-05281-01","price":118.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/dspiae-long-photo-etch-bender-hobbyisthaven-628.webp?v=1772827583"},{"product_id":"nine-sea-tools-metal-cutting-pliers","title":"Nine Sea Tools Metal Cutting Pliers","description":"\u003cp\u003eEasily cut copper or brass rods with these cutting pliers, specifically made to cut soft metal (such as brass or copper) \u003ca href=\"https:\/\/hobbyisthaven.com\/collections\/tubes-and-rods\"\u003erods and tubes\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Nine Sea Tools","offers":[{"title":"Default Title","offer_id":51426025177377,"sku":"HH-NINESEATOO-05632-01","price":20.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/nine-sea-tools-metal-cutting-pliers-hobbyisthaven-298.webp?v=1772829062"},{"product_id":"photo-etch-bending-tool-with-auxiliary-ruler","title":"Photo Etch Bending Tool With Auxiliary Ruler","description":"\u003cp\u003eWhen working with photoetched (PE) parts, folding them to create a three-dimensional shape is essential. Attempting to do this by hand or with regular tweezers can lead to damage or incorrect angles. \u003c\/p\u003e\n\n\u003cp\u003eWhile our store offers high-grade PE bending tools, we also have a simple and affordable option that might be just what you need.\u003c\/p\u003e\n\n\u003cp\u003eWith its various surfaces, this tool ensures perfect folds for your parts, regardless of how many bends are required. It also helps protect these small, delicate pieces from damage.\u003c\/p\u003e\n","brand":"Alexen Models","offers":[{"title":"Default Title","offer_id":51926015312161,"sku":"HH-PHOTOETCHB-06042-01","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/photo-etch-bending-tool-with-auxiliary-ruler-hobbyisthaven-833.webp?v=1772831718"},{"product_id":"metal-rods-wire-cutting-pliers","title":"Metal Rods\/Wire Cutting Pliers","description":"\u003cp\u003eIf we want to cut hard plastics, metal wires, or fine rods, we need a specially hard-sided cutter, in order not to damage the precision ones we use for styrene, resin, or other soft materials.\u003c\/p\u003e\n\n\u003cp\u003eWith these pliers, you can cut brass and copper wires and rods, as well as thin steel wires.\u003c\/p\u003e\n\n\u003cp\u003eDo NOT cut hard steel rods with these, as they can be damaged.\u003c\/p\u003e\n\n\u003cp\u003eValid for wire\/rod diameters up to 2,5mm. Do not cut wires or rods larger than that.\u003c\/p\u003e\n","brand":"Hobbyist Haven","offers":[{"title":"Default Title","offer_id":51926231089441,"sku":"HH-METALRODS-06043-01","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/metal-rods-wire-cutting-pliers-hobbyisthaven-715.webp?v=1772831739"},{"product_id":"metal-rod-bender-with-scale","title":"Metal Rod Bender with Scale","description":"\u003cp\u003eMetal wire is not easily bent into the correct shape to achieve realistic handles, pipes, handrails, etc. \u003c\/p\u003e\n\n\u003cp\u003eThis tool lets you create perfectly shaped handles in no time.\u003c\/p\u003e\n\n\u003cp\u003eValid for 1 through 30mm handles.\u003c\/p\u003e\n","brand":"Hobbyist Haven","offers":[{"title":"Default Title","offer_id":51984932241697,"sku":"HH-METALRODBE-06078-01","price":14.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/metal-rod-bender-with-scale-hobbyisthaven-745.webp?v=1772832025"},{"product_id":"galaxy-tool-stepped-mandrel","title":"Galaxy Tool Stepped Mandrel","description":"\u003cp\u003eIn certain projects, our models require wraps with precise diameters. This may involve crafting specialized components, such as shock absorbers or intricately rolled conduits, for hydraulic installations. \u003c\/p\u003e\n\n\u003cp\u003eTo facilitate this process, we use a stepped mandrel, expertly designed with sections of varying diameters. This unique feature allows you to seamlessly wrap brass or copper wire around the mandrel’s contours, ensuring that you achieve a flawless and aesthetically pleasing result. The versatility of this tool not only enhances accuracy but also elevates the quality of your finished products.\u003c\/p\u003e\n","brand":"Galaxy Model","offers":[{"title":"Default Title","offer_id":52106683810081,"sku":null,"price":20.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/galaxy-tool-stepped-mandrel-hobbyisthaven-115.webp?v=1772832769"},{"product_id":"liang-metal-rod-bender","title":"LIANG Metal Rod Bender","description":"\u003cp\u003eIt's hard to bend metal rods into the correct shape to achieve realistic handles, pipes, handrails, etc. \u003c\/p\u003e\n\n\u003cp\u003eThis tool lets you create perfectly shaped handles in no time.\u003c\/p\u003e\n\n\u003cp\u003eValid for 1 through 30mm handles.\u003c\/p\u003e\n","brand":"Liang","offers":[{"title":"Default Title","offer_id":52250340688161,"sku":null,"price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/liang-metal-rod-bender-hobbyisthaven-914.webp?v=1772833460"},{"product_id":"ustar-65x50mm-upgraded-photoetch-bending-tool","title":"UStar 65x50mm Upgraded Photoetch Bending Tool","description":"\u003cp\u003e\u003c!-- x-tinymce\/html --\u003e\u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eMany modern models include photo-etched parts. Some of us also buy extra parts to add more details. Photo-etched sheets are flat, so you need to fold them to create three-dimensional shapes. \u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eIf you try to fold them by hand or with regular tweezers, you might damage the parts or fold them incorrectly.\u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eThis accessory helps you achieve perfect folds without\u003cstrong\u003e harming these small, delicate pieces\u003c\/strong\u003e. \u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eThe new, upgraded version by UStar uses a special aluminum alloy that provides a better grip and lighter weight, and also features a 360º-rotating upper block so you can always find the perfect section to make your bends.\u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eSize: 65 x 50 mm (2.56 x 1.97 in.)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n","brand":"UStar","offers":[{"title":"Default Title","offer_id":52373566325025,"sku":null,"price":43.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/ustar-65x50mm-upgraded-photoetch-bending-tool-hobbyisthaven-912.webp?v=1772833910"},{"product_id":"manwah-multi-functional-compact-photo-etched-bender","title":"Manwah Multi-functional Compact Photo Etched Bender","description":"\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eMany modern models include photo-etched parts, and many builders enhance their models with aftermarket components.\u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eHowever, these flat sheets need to be folded for three-dimensional assemblies.\u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eThis accessory makes folding easy and precise, allowing you to achieve perfect results without harming the delicate parts. Make 90-degree folds, curved bends, and more.\u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eBesides, thanks to its design, it can serve as a holder for sandpaper, making it a very versatile tool (see images for reference).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Manwah","offers":[{"title":"Default Title","offer_id":52557801193761,"sku":null,"price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/manwah-multi-functional-compact-photo-etched-bender-hobbyisthaven-293.webp?v=1775846306"},{"product_id":"madworks-flat-nose-photo-etch-bending-pliers","title":"Madworks Flat Nose Photo Etch Bending Pliers","description":"\u003cp\u003eMany modern kits include photo-etched (PE) parts for added detail, and countless aftermarket PE sets are available. We can also scratch-build parts or entire structures using metal sheets or rods. \u003c\/p\u003e\n\n\u003cp\u003eThese materials often require bending to represent three-dimensional objects accurately. While thin PE bending tweezers work well for tiny parts, larger tools are better suited to longer or sturdier components.\u003c\/p\u003e\n\n\u003cp\u003eThese pliers are made from durable materials and designed to achieve perfect bends.\u003c\/p\u003e\n","brand":"Madworks","offers":[{"title":"Default Title","offer_id":52557859946785,"sku":null,"price":35.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/madworks-flat-nose-photo-etch-bending-pliers-hobbyisthaven-515.webp?v=1775847270"},{"product_id":"manwah-stainless-steel-precision-cutting-tweezers","title":"Manwah Stainless Steel Precision Cutting Tweezers","description":"\u003cp data-end=\"383\" data-start=\"155\"\u003eThese precision tweezers are specially designed for \u003cstrong data-end=\"252\" data-start=\"207\"\u003eclean, controlled cutting in tight spaces\u003c\/strong\u003e. Unlike standard tweezers made for gripping, the front tip of this tool is built to \u003cstrong data-end=\"382\" data-start=\"337\"\u003ecut small attachment points with accuracy\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp data-end=\"598\" data-start=\"385\"\u003eThey are especially useful for \u003cstrong data-end=\"461\" data-start=\"416\"\u003eremoving photo-etched parts from the fret\u003c\/strong\u003e and for \u003cstrong data-end=\"542\" data-start=\"470\"\u003ecutting away fine support connections on 3D printed figures or parts\u003c\/strong\u003e without putting unnecessary stress on delicate details.\u003c\/p\u003e\n\n\u003cp data-end=\"859\" data-start=\"600\"\u003eThe slim, precise tip gives you excellent access in narrow areas where larger cutters may be too bulky or aggressive. A very practical tool for modelers, miniature builders, and 3D printing hobbyists who need more control when working on small, fragile parts.\u003c\/p\u003e\n\n\u003cp data-end=\"875\" data-start=\"861\"\u003e\u003cstrong data-end=\"875\" data-start=\"861\"\u003eIdeal for:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul data-end=\"1075\" data-start=\"876\"\u003e\n\t\u003cli data-end=\"925\" data-section-id=\"i4kz3b\" data-start=\"876\"\u003eCutting attachment points on photo-etched parts\u003c\/li\u003e\n\t\u003cli data-end=\"974\" data-section-id=\"3p0a1n\" data-start=\"926\"\u003eRemoving fine supports from 3D printed figures\u003c\/li\u003e\n\t\u003cli data-end=\"1010\" data-section-id=\"4fvlc5\" data-start=\"975\"\u003ePrecision hobby and modeling work\u003c\/li\u003e\n\t\u003cli data-end=\"1075\" data-section-id=\"bvv6y5\" data-start=\"1011\"\u003eReaching tight spaces where regular cutters are less practical\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp data-end=\"1177\" data-start=\"1077\"\u003e\u003cstrong data-end=\"1091\" data-start=\"1077\"\u003eImportant:\u003c\/strong\u003e\u003cbr data-end=\"1094\" data-start=\"1091\"\u003e\nThis tool is designed for \u003cstrong data-end=\"1131\" data-start=\"1120\"\u003ecutting\u003c\/strong\u003e, not for holding parts like regular tweezers.\u003c\/p\u003e\n","brand":"Manwah","offers":[{"title":"Default Title","offer_id":52557867811105,"sku":null,"price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/manwah-stainless-steel-precision-cutting-tweezers-hobbyisthaven-939.webp?v=1775847649"},{"product_id":"joystar-photo-etched-parts-bender","title":"Joystar Photo-Etched Parts Bender","description":"\u003cp\u003eA precision bench vise built for clean, repeatable folds on photo-etched brass and stainless parts. Drop the etch into the channel, tighten the dual knobs, and bend along the milled edge for sharp angles every time.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cp\u003eHeavy aluminum body keeps the bender stable on the workbench. Multiple clamping channels handle short straps, wide panels, and small folded boxes for AFV, ship, and aircraft kits. Smooth machined edges prevent marring delicate PE parts during the fold.\u003c\/p\u003e\u003ch3\u003eWhat Modelers Use It For\u003c\/h3\u003e\u003cp\u003eForming engine grilles, fender brackets, exhaust shrouds, ammo boxes, and figure equipment from aftermarket photo-etch sets. Suitable for 1\/35, 1\/48, 1\/72, and ship-scale PE detail upgrades.\u003c\/p\u003e","brand":"Hobbyist Haven","offers":[{"title":"Default Title","offer_id":52652609306913,"sku":null,"price":63.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/joystar-photo-etched-parts-bender-hobbyisthaven-256.webp?v=1778256623"},{"product_id":"mazha-photo-etch-parts-bender","title":"MAZHA Photo-Etch Parts Bender","description":"\u003cp\u003eFold photo-etched parts crisply and accurately with the MAZHA etched parts bender. This machined bending vise clamps PE frets flat and gives you a straight edge to bend against, so railings, brackets, and detail parts come out sharp and consistent.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe tool holds thin brass and steel frets securely while you lift and fold, with multiple slot widths for short and long bends. Ideal for military armor, aircraft, and ship detailing where clean photo-etch work makes the difference.\u003c\/p\u003e\n\u003ch3\u003eSizes\u003c\/h3\u003e\n\u003cp\u003eChoose the medium bender (60x91mm) for most detail work, or the large bender (177x91mm) for either small or longer folds and bigger frets. \u003c\/p\u003e","brand":"Hobbyist Haven","offers":[{"title":"Large","offer_id":53009795776801,"sku":"HH-MAZHA-02","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":53009795809569,"sku":"HH-MAZHA-01","price":47.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1374\/4527\/files\/mazha-photo-etch-parts-bender-hobbyisthaven-768.webp?v=1783596272"}],"url":"https:\/\/hobbyisthaven.com\/en-efta\/collections\/tools-for-pe-metal-parts.oembed?page=2","provider":"HobbyistHaven","version":"1.0","type":"link"}